WDR3.0西数硬盘专修工具 V3.6 绿色中文版下载

小佳系统管家系统工具 • 45 浏览 • 发布(2022-05-18) • 更新(2022-05-18)

文章目录

西数硬盘专用修复工具能备份的所有固件,使用WDR首先要将硬盘切换到IDE模式,否则找不到硬盘,可以在winpe下使用,但是不要在要修复的硬盘下打开, 程序放置:c:\work1\wdc 即可运行!
西数硬盘清零工具可以复位smart G转P表 。

功能如下:

保存ROM文件: Save flash Contents -> ROM.bin file.
写ROM文件: Write ROM.bin.
保存ROM中固件模块: Save L ROMFirmware.
写ROM中固件模块: Write L ROMFirmware.
重复写ROM中固件模块:repeat Write L ROMFirmware.
保存固件模块: Save L Firmware.
写固件模块: Write L Firmware.
重复写固件模块: repeat Write L Firmware.
写单个固件模块: write SingleModule file to the drive
保存全部磁道镜像: Save ROYL all reserved cylinders.
写全部磁道镜像: write head image files to all reserved cylinders.
写0磁头全部磁道镜像: write L head0 image files to all reserved cylinders.
写1磁头全部磁道镜像: write L head1 image files to all reserved cylinders.
保存硬盘全部文件: Save L ALL SA backups. (ROM、ROMFirmware、Firmware、reserved cylinders)

检查单个模块: Check Single Reserved File.
检查全部模块: Check All Reserved Files.

初始化硬盘: initialized harddisk.
清除复位SMART: clear smart.
砍磁头: Head Depop.
内部格式化: Format
改变硬盘容量: capacity change for harddisk
显示自校流程: show the L SF sequence.
设置自校起始步: change pointer to the L SF.
写硬盘型号: write L MODEL.
写硬盘SN号: Write L SN.
查看G表: SHOW L GLIST.
查看GD表: SHOW L GDLIST.
查看P表: SHOW L PLIST.
查看PD表: SHOW L PDLIST.
清除G表: clear L GLIST.
清除GD表: clear L GDLIST.
清除P表: clear L PLIST.
清除PD表: clear L PDLIST.
开始自校: Start SelfTest harddisk.
结束自校: End SelfTest harddisk.
加载LDR: Load Permanent Overlay
制作LDR: Make Permanent Overlay

保存ROM文件: Save flash Contents -> ROM.bin file.
写ROM文件: Write ROM.bin.
保存ROM中固件模块: Save L ROMFirmware.
写ROM中固件模块: Write L ROMFirmware.
重复写ROM中固件模块:repeat Write L ROMFirmware.
保存固件模块: Save L Firmware.
写固件模块: Write L Firmware.
重复写ROM中固件模块:repeat Write L Firmware.
保存全部磁道镜像: Save ROYL all reserved cylinders.
写全部磁道镜像: write head image files to all reserved cylinders.
保存硬盘全部文件: Save L ALL SA backups. (ROM、ROMFirmware、Firmware、reserved cylinders)

检查单个模块: Check Single Reserved File.
检查全部模块: Check All Reserved Files.

初始化硬盘: initialized harddisk.
清除复位SMART: clear smart.
砍磁头: Head Depop.
内部格式化: Format
改变硬盘容量: capacity change for harddisk
显示自校流程: show the L SF sequence.
设置自校起始步: change pointer to the L SF.
写硬盘型号: write L MODEL.
写硬盘SN号: Write L SN.

解压密码:www.downcc.com

本文关键词检索:winpe,西部数据,硬盘修复